Connecting The Projector; Terminals Of The Projector - Ask Proxima 9280 User Manual

CONNECTING THE PROJECTOR

This projector has INPUT TERMINALS and OUTPUT TERMINALS on its side for connecting computers and
video equipment. Refer to the figure on pages 11 to 14 and connect properly.
INPUT TERMINALS
OUTPUT TERMINALS
COMPUTER INPUT-1
TERMINALS (DIGITAL/ANALOG)
Connect the computer output
to one of these terminals.
(Refer to P14.)
PC IN-1
analog
PC IN-2
R
monitor OUT
COMPUTER INPUT-2
TERMINALS (BNC x 5)
Connect the computer output to
these terminals. (Refer to P14.)

TERMINALS OF THE PROJECTOR

INPUT TERMINALS
CONTROL PORT (1/2) CONNECTORS
When controlling the computer
with the Remote Control of
this projector, connect the
mouse port of your personal
computer to these terminals.
(Refer to P14.)
digital
G B H
COMPUTER AUDIO INPUT (1/2) JACKS
Connect the audio output (stereo)
from the computer to these jacks.
(Refer to P14.)
PC IN-1 AV IN
S-video
analog digital PC control 1 audio 1 R–audio–L
(stereo)
(mono)
PC IN-2
R G B H V PC control 2 audio 2 Y/video– Cb/Pb– Cr/Pr
(stereo)
monitor OUT
R–audio–L video
R G B H V
reset R/C jack
AUDIO INPUT JACKS
Connect the audio output
from the video equipment
to these jacks.
(Refer to P13.)
AV IN
PC control 1 audio 1
(stereo)
PC control 2 audio 2
V
(stereo)
Connect the composite video output from the
video equipment to the VIDEO/Y jack or
connect the component video outputs to the
Y/VIDEO, Pb/Cb and Pr/Cr jacks.
(Refer to P13.)
S-VIDEO INPUT JACK
Connect the S-VIDEO
output from the video
equipment to this jack.
(Refer to P13.)
S-video
R–audio–L
(mono)
Y/video– Cb/Pb– Cr/Pr
VIDEO INPUT JACKS
(Y/VIDEO, Pb/Cb, Pr/Cr)
11