Sharp AY-XPC18LR Service Manual page 36

AYXPC18LR
15.Cut the fixing bands and remove thermistors.
Thermistor
16.Remove the compressor cover.
Remove
17.Remove the nut and terminal cover..
Nut
Thermistor
Terminal cover
5 – 8
18.Disconnect 3 terminals.
NOTE: Caution to the position of connectors when reinstalling.
Orange (C)
Red (R)
19. Remove the 1 nut fixing the propeller fan, then remove it.
20.Remove the 2 screws fixing the motor angle, then remove it.
White (S)
Propeller fan
Nut