[2] OUTDOOR UNIT
1. Remove the 4 screws fixing the side cover and valve cover then
remove them..
Side cover
2. Remove the 6 screws fixing the top plate, then remove it.
Top plate
3. Remove the 1 screw fixing the front panel R and slide the front
panel R down, then remove it.
Front panel R
Valve cover
Top plate
4. Remove the 5 screws fixing the motor angle T, then remove it.
5. Remove the 2 screws fixing the angle, then remove it.
Angle
6. Remove the 4 screws fixing the front panel L, then remove it.
Front panel L
The hook is removed
2
Front panel L
5 – 5
AYXPC18LR
Motor angle T
1