Ember Installation; Rock Wool Installation - Travis Industries 864 HO GS Installation Manual

Ember Installation

Install the embers as shown below. Make sure to cover the screws on the burner and any fireback
seams with embers to create an aesthetic firebox.

Rock Wool Installation

The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock
wool works best when it is applied in a very thin, porous layer. The best method for applying the
rock wool is to brush it on to the burner. Compress a clump of rockwool between your thumb and
forefinger. Use a stiff brush to apply a thin layer of rockwool fibers onto the burner. Do not use the
entire bag of rockwool. Use only a small amount and save the remainder. Over-use of rockwool will
diminish the glow and may cause sooting or other adverse conditions.
© Travis Industries
Installation
(for qualified installers only)
4100728
47
100-01254_000