Epson EMP-TW1000 Service Manual page 89

Attach EMI Suppressors on top of the MA board following the instructions
C A U T I O N
below.
1). Attach the EMI Suppressor on the ICs (1) while matching the centers as
shown in Figure 4-24.
2). Attach two EMI Suppressor; C on top of each other on the IC (2) while
matching the centers as shown in Figure 4-24.
3). Attach two EMI Suppressor on top of each other while aligning them
along the standard line as shown in Figure 4-24.
SEIKO EPSON
EMP-TW1000
EMI Suppressor; C
standard line
(1)
(2)
(3)
Figure 4-24.
4-27
EMI Suppressor
Revision:A