Removing The Emp-Tw1000 Model Name Plate And Epson 32H Logo Plate - Epson EMP-TW1000 Service Manual

4.2.1 Removing the EMP-TW1000 Model Name Plate and EPSON 32H
Logo Plate
1. Using a screwdriver or a similar tool, push the EMP-TW1000 Model Name Plate from its
backside through the hole of the Upper Case; B, and remove the plate. (When removing the
Upper Case; B, refer to p.13)
2. Using a screwdriver or a similar tool, push the EPSON 32H Logo Plate from its backside
through the hole of the Upper Case; B, and remove the plate. (When removing the Front
Case Unit; F, refer to p.17)
Model Name Plate, EMP-TW1000
holes
Logo Plate; EPSON32H
SEIKO EPSON
EMP-TW1000
Figure 4-2.
4-9 Revision:A