Control Paneland Features - Maytag MHW7000AW2 Use & Care Manual

CONTROL PANELAND FEATURES
Not all features and cycles are available on all models.
Model M HW7000A*
NOTE: The control panel features a sensitive surface that responds
to a light touch of your finger. To ensure your selections are registered,
touch the control panel with your finger tip, not your fingernail. When
selecting a setting or option, simply touch its name.
Model M HW6000A*
J
O POWER/CANCEL
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
WASH CYCLE KNOB
Use your Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
An LED will light up for the cycle selected.
NOTE: The Clean Washer LED will flash when the washer has run
30 wash cycles as a reminder to run the Clean Washer cycle.
See "Cycle Guide" for detailed descriptions of cycles.
NOTE: For best results when using the Overnight Wash & Dry
cycle, use for loads weighing 2.5 pounds and less, such as a
soccer uniform or a running tank and shorts.
O START
Touch and hold until the light above START comes on to start a
cycle, or touch once while a cycle is in process to pause it. If you
want to add a garment, you can touch START when the "Add a
Garment" LED is on.
O LED DISPLAYAND SETTINGS
When you select a cycle, its default settings will light up and the
Estimated Cycle Time will be displayed. Factors such as load size,
wash temperature, and water pressure may affect the time shown in
the display during the cycle. Tightly packing garments, unbalanced
loads, or excessive suds may cause the washer to adjust the cycle
time, as well.
Touch the desired option along the right of the display to adjust
settings. See "Cycle Guide" for available settings on each cycle.
Not all settings are available with all cycles.
4
O
O
Tern peratu re
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based on
the type of fabric and soils being washed. For best results,
follow the garment label instructions. All wash temperatures
feature a cold rinse.
Soil Level
The Soil Level setting (wash time) is preset for each wash
cycle. For most loads, use this preset soil level. When
you change the soil setting, the cycle time will increase or
decrease in the Estimated Cycle Time display.
For heavily soiled and sturdy fabrics, use the Soil Level
setting to select more wash time. For lightly soiled and
delicate fabrics, use the Soil Level setting to select less
wash time. Lower soil level settings will help reduce
tangling and wrinkling.
Spin Speed
This washer automatically selects the spin speed based on
the cycle selected. Some preset speeds can be changed.
[] Higher spin speeds mean shorter dry times, but may
increase wrinkling in your load.
[] Lower spin speeds reduce wrinkling, but will leave
your load more damp.
DELAY START
Use + and - to delay the start of the wash cycle by up to
12 hours. To turn off Delay Start, use + and - to set the delay
time to "01' or touch POWER/CANCEL
CYCLE STATUS LIGHTS
For details, see "Cycle Status Lights".