Maytag MHW7000AW2 Use & Care Manual page 11

f
8, Select CYCLE*
normal
m m
P_w_rWash
overnigh"_
wash & dry
allerge_
sanitize
cold
wash
m
wrinkle
contro!
;e[icates
_edding
Appearance may vary.
Turn cycle knob to select your wash cycle. See "Cycle Guide" for
details on cycle features.
9, Adjust settings, if desired*
extra
( lco[d warm hot
temperature
extra
) light reed heavy
SOiL
{eve_ m m m
max
I sp,n speed )none reed extract
1 0, Select any additional options*
Appearance may vary.
drum
i light
fresh
m hold
steam
m
for stains
m extra
rinse
cycle
m signal
control
mm lock
hold 3 sees
To add an option to the cycle, touch its name - Drum Light
(some models), Fresh Hold/Fresh Spin, Steam for Stains, Extra
Rinse, Cycle Signal, or Control Lock. To remove an option from
the selected cycle, touch the option again.
1 1, Setting a delayed start
estimated cycle time
The display will show the default settings for the selected cycle. To
adjust a setting, touch its name - Temperature, Soil Level, or Spin
Speed. Adjusting settings will change the Estimated Cycle Time.
Tightly packing the load, unbalanced loads, or excessive suds may
also cause the washer to increase the cycle time.
if you do not want to begin a cycle immediately, you may choose
the DELAY START option. This will delay the start of the wash
cycle by up to 12 hours.
To set a delayed start:
1. Touch DELAY START + and - buttons to set the desired delay
time.
2. Touch and hold START to set the delay. The delay countdown
has started when the START light stops blinking.
*Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
11