GE C2S985SET7SS Owner's Manual page 31

Troubleshooting tips ... Before you call for service
Possible Cause What To Do
Top burners do Plug on range is not Make sure electrical plug is plugged into a live, properly
not light or do not completely inserted in the grounded outlet.
burn evenly. (The electrical outlet.
front right burner Burner slits on the side of the Remove the burners and clean them. Check the electrode
is designed to have burner may be clogged, area for burned-on food or grease. See the Care and cleaning
slightly smaller flames of the range section.
between the 6 and
9 o'clock positions. Improper burner assembly.. Make sure the burner parts are installed correctly. See the
This is normal.) Care and cleaning of the range section.
Burner flames very Improper air to gas ratio. If range is connected to LP gas, contact the person who
large or yellow installed your range or made the conversion.
Burners do not light Plug on range is not Make sure electrical plug is plugged into a live, properly
completely inserted in the grounded outlet.
electrical outlet.
Gas supply not connected or See the Installation Instructions that came with your range.
turned on.
A fuse in your home may be Replace the fuse or reset the circuit breaker.
blown or the circuit breaker
tripped.
Burner parts not replaced See the Care and Cleaning of the range section.
correctly.
Lock Controls or If LOC ON appears in the display, the range control is locked.
Control Lockout Turn this feature off to use the range. See the Lock Control
feature is activated feature in the Oven Controls section.
--4
©
C
r==
I
©
©
-4
m
Z
©
-4
m
=t3