Special Features - GE C2S985SET7SS Owner's Manual

Hide thumbs Also See for C2S985SET7SS:
Table of Contents

Advertisement

Available languages

Available languages

O9
(1)
4.-J
(1)
L.L
m
L)
(1)
CL
CO
(/3
4--J
C-
(1)
C-
(1)
>
O
O
LU
3::
t.--
©
Z
m
of)
Oven Air Vents
Never block the vents (air openings) of the range. They
provide the air inlet and outlet that are necessary for the
range to keep cool and operate properly with correct
combustion.
Air openings are located at the rear of the cooktop, at
the top and bottom of the oven door, and at the bottom
of the range.
Special Features
Vent appearance
and location
vary.
There are several different special features on your oven. To change the settings of these special features, press the Bake
and Broil pads at the same time and hold for three seconds. (SF) will appear in the display. Select the feature you want to
change. When the change has been made, press the Start key to save the change and return to the time of day.
Adjust the Oven Temperature
This feature allows the oven baking temperature to be
adjusted up to 35°F hotter or down to 35°F cooler. Use
this feature if you believe your oven temperature is too
hot or too cold and wish to change it.
Press the Bake pad to enter the temperature
adjustment
mode. A number between 35 and - 35 will display.
Use the number pads to set the desired temperature
adjustment and use the Bake pad to change between
negative and positive.
Press the Start pad to save the temperature adjustment.
End of Timer Signals
This is the tone that signals the end of a timer. The tone
can be continuous (Con bEEp) or one repeating beep
(bEEp). A continuous setting will continue to sound a tone
until a button on the control is pressed. Press the Kitchen
Timer pad to view the current setting and then to change
the setting.
Fahrenheit
or Celsius Temperature
Display
The oven control is set to use Fahrenheit temperatures (F),
but you can change it to use Celsius temperatures (C).
Press the Broil and Cook Time pads at the same time to
view the current setting, press again to change the setting.
Clock Display
This feature specifies how the time of day will be
displayed or if no time of day will be displayed. You can
select a standard 12-hour clock (12 hr), 24-hour military
time display (24 hr), or no clock displayed (OFF). Press
the Clock pad to view the current setting, press again to
change the setting.
Sound Volume
This feature allows the oven tone volume to be adjusted
between high (3 bEEP), medium (2 bEEP) and low
(1 bEEP). Press the Cook Time pad to view the current
setting or to change the setting. The control will sound
the oven tone at the new volume level each time the
sound level is changed.
Cook and Hold
This feature keeps cooked foods warm for up to 3
hours after the cooking function is finished. Press the
Cooking
Time pad. The display will show (Hid). Press
the Cooking
Time pad again to activate the feature. The
display will show (H/d).
Autorecipe
Conversion
This feature (ON/OFF), automatically
reduces the
programmed recipe temperature in Convection Bake
mode by 25°F. The default setting for this feature is off.
Note: This option does not convert baking time, only
temperatures. This option does not adjust temperatures for
Convection Roast mode. Press either Bake or Roast to
view the current setting. Press again to change the setting.
Using the Sabbath
Feature
(Designed
for use on the
Jewish Sabbath
and Holidays)
The Sabbath feature can be used
for baking/roasting
in the upper and
lower oven or baking drawer (on
CERTIFIED
A
SABBATH_-'_
MODE
_:_
some models). It cannot be used for convection, broiling,
self-cleaning or Delay Start cooking.
NOTE: The oven light comes on automatically
(on some
models) when the door is opened and goes off when the
door is closed. The bulb may be removed. See the Oven
Light Replacement section. On models with a light switch
on the control panel, the oven light may be turned on
and left on.
How to Set for Regular Baking/Roasting:
Make sure the clock shows the correct time of day and
the oven is off.
1. Press and hold both the Bake and Broil Hi/Lo pads,
at the same time, until the display shows (SF).
2. Tap the Delay Start pad until (SAb bAtH) appears in
the display.
3. Touch the Start pad and (D) will appear in the
display.
4. Touch the Bake pad. No signal will be given.
4
49 85217 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents