Step 7, Install Hood Attachment Screws; Step 8, Mount The Hood Onto The Support; Step 9, Connect Cables - Monogram ZV925 Installation Instructions Manual

Installation instructions
INSTALLATI0 N-R ECI R CULATING
[STEP 7 INSTALL HOOD ATTACHMENT
SCREWS
li
/
, Install 4 hood attachment screws in the bottom
of the support as shown. Leave 1/4" gap between
screw head and support flange.
[STEP 8 MOUNT THE HOOD ONTO THE
SUPPORT
,&WARNING:
Two people are required to
lift and position the hood onto the support.
,,_VERTISSEM ENT
: II faut deux
personnes pour lever et mettre en place a hotte sur
le support de montage.
, Lift the hood to the bottom
[:l:l:l!k_J:,l
of the support, engaging I_J :I:HI
the keghole slots to the 4 kt-_ :l:Jll
1
mou, ,,n crews.
" Tighten the FI :1:1//_¢_ I:1
4 mounting screws._
3
, Install 6 additional screws as shown.
jSTEP 9 i CONNECT CABLES
Retainer
clip -..4
/
, Join the two cable connectors at the front of the
hood. Secure the cables behind the retainer clip.
21