Tools And Materials Required; Remove The Packaging - Monogram ZV925 Installation Instructions Manual

Installation Preparation
TOOLS AND MATERIALS REQUIRED
(NOTSUPPLIED)
Ducttape
3/8" swivel
socket or pivoting
_ hex socket wit.h 6"
tnppe_ s
Pencil and tape measure
Spirit level /
Carpenter's square
Step ladder
Keg hole saw
Safetg glasses
Wire nuts
Flashlight
Saber saw
or sawsall
Pliers Metal snips
Electric or batterg-operated
drill and 3/16" bits, Phillips and
flat blade screwdriver bits.
8" round metal
duct, length to
suit installation.
Phillips and
flat blade
drivers
©
Strain relief for
junction cover.
!20V 60Hz. !S or 20 Amp,
2-wire with ground, properlg
grounded branch circuit.
REMOVE THE PACKAGING
IkCAUTION:
LIFTTHE HOOD OUT OF THE
BOX BY THE CENTER METAL PORTION. DO NOT LIFT
BY THE GLASS SIDES.
,_PRU DENCE : LEVEZ LA HOTTE A
L'EXTERIEUR DE LA BO/TE PAR LA PORTION METAL
CENTRAL. NE LEVEZ PAS PAR LES COTES DE VERRE.
, CAUTION:
Wear gloves to protect
against sharp edges.
APRUDENCE : Portez des
gants
pour
6viter les blessures caus6es par les tranchants.
, Grasp the hood bg the metal insert in the center
and lift straight up and out of the box.
, Remove and properlg discard the plastic wrapping.
, Remove parts box, duct covers and other
packaging.