Dynamic Ip (Dhcp) - D-Link DIR-602 User Manual

Section 3 – Configuration
Use Dynamic IP(DHCP) if your Internet Service Provider (ISP) didn't provide you with IP Address information and/or a
username and password.
My Internet Select Dynamic IP (DHCP) to obtain IP Address
Connection: information automatically from your ISP. Select
this option if your ISP does not give you any IP
numbers to use. This option is commonly used
for Cable modem services.
Host Name: The Host Name is optional but may be required
by some ISPs.
MTU: Maximum Transmission Unit - you may need to
change the MTU for optimal performance with
your specific ISP. 1500 is the default MTU.
MAC The default MAC Address is set to the Internet
Address: port's physical interface MAC address on the
Broadband Router. It is not recommended that
you change the default MAC address unless
required by your ISP. You can use the Clone
MAC Address button to replace the Internet
port's MAC address with the MAC address of
your Ethernet card.
D-Link DIR-602 User Manual

Dynamic IP (DHCP)

23