D-Link DIR-602 User Manual page 32

Section 3 – Configuration
1.The Security Mode includes WPA Personal Only,
WPA2 Personal Only,Auto(WPA or WPA2 Personal).
You can select one of them for configuration.
2. Next to Cipher Type, select TKIP + AES, TKIP,
or AES. If you have wireless clients that use both
types, use TKIP + AES.
3. Next to Pre-Shared Key, enter a key (passphrase).
The key is entered as a passphrase in ASCII format
at both ends of the wireless connection. The passphrase
must be between 8-63 characters.
4. Click Save Settings to save your settings. If you
are configuring the router with a wireless adapter,
you will lose connectivity until you enable the Security
mode on your adapter and enter the same passphrase
as you did on the router.
D-Link DIR-602 User Manual
31