Network Settings - D-Link DIR-602 User Manual

Wireless n router

Hide thumbs

Table Of Contents

Table of Contents

Section 3 – Configuration

This section will allow you to change the local network settings of the router and to configure the DHCP settings.

IP Address:

Enter the IP address of the router. The default

IP address is 192.168.0.1.

Subnet Mask:

Enter the Subnet Mask of the router.

DHCP SERVER SETTINGS:

Enable DHCP

Select Enabled to enable the DHCP server on

Server:

your router. Select Disabled to disable this

function.

DHCP Start IP

Enter the starting and ending IP addresses for

Address :

the DHCP server's IP assignment.

Maximum DHCP

Set the maximum number of DHCP users.

Users:

DHCP Lease

The length of time for the IP address lease.

Time :

Enter the lease time in minutes.

ADD DHCP RESERVATION:

Enable:

Check the box to enable DHCP reservation.

IP Address:

Enter the IP address you want to assign to the

computer or device. The IP address must be

within the DHCP IP address range.

MAC Address:

Enter the MAC address of the computer or

device, then click the Copy Your PC's MAC

Address button to automatically enter the

MAC address of your current PC's network

interface.

DHCP

This list shows the clients using DHCP

Reservations List :

reservation.

DHCP Clients

The

List :

dynamically assigned IP addresses.

D-Link DIR-602 User Manual