Antenna Or Cable Coaxial Connection - Memorex MLT4352 Owner's Manual

Antenna or Cable Coaxial Connection

Connect an antenna, cable, or cable box to watch TV as follows:
1
Make sure the power is off on the TV and cable/satellite box (if using).
2
Connect the coaxial cable into the Coaxial jack on the rear of the TV.
3
Turn on the TV (and box, if used).
4
Press the SOURCE button and then select TV using the Navigation q/p buttons.
Confirm by pressing the OK button. Follow the on-screen instructions for the Setup
Wizard (see page 34).
NOTES:
• Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information.
• The HDTV's tuner is designed for HDTV, therefore requires a stronger signal than normal TVs. If you cannot achieve that
signal level with your antenna or cable, your HDTV might lose picture or sound.
INSTALLATION
Antenna
Coaxial (75Ω)
Box
Terminal
- 12 -