Composite Cable Connection - Memorex MLT4352 Owner's Manual

Composite Cable Connection

Connect an external device that utilizes Audio/Video jacks as follows:
1
Make sure the power is off on the TV and external unit.
2
Connect the red and white plugs of an audio cable (not included) from the Audio Out
jacks on the external unit to the red and white Component AV1 Audio In jacks on the
rear of the TV.
3
Connect the yellow (video) plug from the Video Out jack on the external unit to the
yellow Video In jack on the rear of the TV.
4
Turn on the TV and external unit.
5
Press the SOURCE button and then select AV using the Navigation q/p buttons.
Confirm by pressing the OK button.
NOTE: It is very important to insert the correct color plug into the same color jack.
INSTALLATION
Out Jacks on External Unit
L R
O O
- 15 -
DVD
HD Cable Box
etc.
VIDEO
(Not
Included)