Outdoor Antenna Connections - Memorex MSP-TV1300 Operating Instructions Manual

OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED)
Follow the instructions for the type of antenna system you intend to use. If using Cable or Satellite, see page 7.
Combination VHF/UHF
Antenna (Single 75 ohm cable
or 300 ohm twin–lead wire)
Connect the 75 ohm cable from
combination VHF/UHF antenna to the
antenna jack.
OR
If your combination antenna has a 300
ohm twin-lead wire, use a 300-75 ohm
matching transformer (NOT SUPPLIED).

OUTDOOR ANTENNA CONNECTIONS

Combination VHF/UHF
Antenna (Separate VHF and
UHF 300 ohm twin–leads)
VHF/UHF
75 Ohm
Connect the UHF twin-lead wire to a
combiner (NOT SUPPLIED). Connect
the VHF twin-lead to a 300-75 ohm
matching transformer (NOT SUPPLIED).
Attach the transformer to the combiner.
Attach the combiner to the antenna jack.
Separate VHF/UHF Antennas
Connect the 75 ohm cable from the VHF
antenna and the UHF antenna twin-lead
wire to a combiner (NOT SUPPLIED).
Attach the combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-
8
lead wire use a 300-75 ohm
matching transformer,
connect the transformer to the
combiner.
then