Usb Media Operation - Memorex MLT4352 Owner's Manual

USB Media Operation

1
With the power off, connect a USB
device to the USB jack.
USB Notes:
• This unit can play audio or picture files.
• Media formats have limitations so some files
will not play properly or will give an error.
• Do not unplug the USB device while playing,
or else it will cause system or device error.
• The system supports USB flash drive and
removable hard disks with standard USB1.1
or USB2.0 interface transmission protocol.
The file format of USB device must be FAT or
FAT32, and cannot be NTFS.
• The USB jack supplies a voltage of 5V and
the maximum current is 500mA; accurate
identification of the multimedia player will
be affected when a storage device above
500mA is used, which is normal.
2
Press the Power button
the unit; the blue Standby indicator
will turn off.
3
Press the SOURCE button
followed by the Navigation qp
buttons to select MEDIA. Press
y
the OK button
See the following page for Function buttons.
OPERATION
to turn on
u
aq
to confirm.
x
USB 2.0
- 37 -
Photo