Connection From An External Unit; Connection Using Coaxial Cable - Memorex MT2028D-BLK User Manual

CONNECTION USING COAXIAL CABLE:

Follow the instructions below to connect an external unit, such as a VCR, to your unit using a 75 ohm coaxial cable. (CABLES
NOT INCLUDED.)
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2. Connect a 75 ohm coaxial cable from the VCR's 75 ohm OUT jack to the ANT jack on the rear of the TV.
3. Press the INPUT button until regular TV or CATV channel appears on the TV screen and press PLAY on the VCR to
watch a tape.
CONNECTION USING AUDIO/VIDEO CABLES:
Follow the instructions below to connect an external unit, such as a VCR or a DVD player, to your unit using Audio/Video
cables. (CABLES NOT INCLUDED.)
INCOMING CATV
CABLE (VCR)
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR or DVD player.
2. Connect the left and right audio cable from the VCR/DVD's Audio OUT jacks to the TV's left and right Audio 1 IN jacks.
Connect the VCR/DVD's Video OUT jack to the TV's VIDEO 1 IN jack.
3. Press the INPUT button until AV1 appears on the TV screen.

CONNECTION FROM AN EXTERNAL UNIT

VCR or DVD player
VCR/DVD
From VCR OUT jacks
AUDIO/VIDEO Cord
From VCR OUT jack
10
VCR
VCR
INCOMING CATV CABLE