Remote Controller Connection - Rinnai INFINITY 26i Service Manual

Infinity high capacity continuous flow gas hot water system
Hide thumbs Also See for INFINITY 26i:
Table of Contents

Advertisement

DO NOT INSTALL THE CONTROLLERS
• NEAR A HEAT SOURCE, SUCH AS A COOK TOP, STOVE OR OVEN. HEAT, STEAM,
SMOKE AND HOT OIL MAY CAUSE DAMAGE
• IN DIRECT SUNLIGHT
• OUTDOORS UNLESS AN ENCLOSURE IS PROVIDED WHICH PROTECTS THE
CONTROLLER AGAINST SUNLIGHT AND DUST INGRESS.
• AGAINST A METAL WALL UNLESS THE WALL IS EARTHED IN ACCORDANCE
WITH CURRENT REGULATIONS.

Remote Controller Connection

Remote controls operate at extra low voltage (12 Volts DC) which is supplied from the appliance.
Controllers are supplied with 15 m of electrical cable. The cable wires for connection to the appliance are
fitted with spade terminals.
Extension cables are available from Rinnai. Alternatively, a two core sheathed (double insulated) flex with
minimum cross-sectional area of 0.5 mm² can be used. Maximum cable length is 50 m.
For connection refer to the "CONNECTING REMOTE CONTROL CABLES" section.
If the front cover of the appliance contains the following text install it in accordance with Diagram 1 below:
Water Heater and Controller installation configurations
If the front cover of the appliance does NOT contain the above text install it in accordance with Diagram 2:
IMPORTANT: If the appliance is to deliver water primarily for the purposes of personal hygiene in an
early childhood centre, primary or secondary school, nursing home or similar facility for young, aged, sick
or disabled persons a Temperature Limiting Device (TLD), such as a Thermostatic Mixing Valve,
may be required even if the appliance is set to 50ºC or less. For these types of applications contact
Rinnai UK.
Infinity REU-V2632FFU / HD200I REU-V2632FFUC
Infinity 26i and HD50i
50º C
H
C
G
O
O
A
T
L
S
D
Diagram 1. Max. 50º C Appliance
Temperature
Temperature
controller
controller
(optional)
(optional)
KITCHEN
LAUNDRY
H
C
G
O
O
A
T
L
S
D
Diagram 2. Not a 50º C Appliance
Note: TLD = Temperature Limiting Device Recommended.
- 10 -
Temperature
KITCHEN
controller
(optional)
Temperature
controller
LAUNDRY
(optional)
Temperature
BATHROOM
controller
(optional)
Temperature
ENSUITE
controller
(optional)
Temperature
Temperature
controller
controller
(optional)
(optional)
BATHROOM
ENSUITE
TLD
Issue 1 - 8/09/03 ©Rinnai

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Infinity hd50i

Table of Contents