Section 6 Care Of Your Machine; Dismantling And Assembling Hook Race - Janome US2014 Instruction Manual

Janome US2014 Instruction Manual
7
www.aaasewing.com
2
1
5
4
3
6

SECTION 6 CARE OF YOUR MACHINE

Dismantling and Assembling
Hook Race
Note:
Turn off the power switch or unplug the
machine.
To dismantle hook race:
Raise the needle to its highest position and open the
hook cover.
Open the hinged latch of bobbin case and take it out of
the machine.
Open the hook race ring holders and remove the hook
race ring.
Remove the hook.
* Clean the hook race with a brush and a soft dry
cloth.
1
Bobbin case
2 Hook race ring holder
3 Hook race ring
Hook
4
5
Hook race
To assemble hook race:
Hold the hook by the center pin and fit it carefully back
into the hook race, forming a perfect circle with the shuttle
driver.
Attach the hook race ring making sure the bottom pin fits
into the notch.
Lock the hook race ring by turning the holders back into
6
position. Insert the bobbin case.
7
Pin
Notch
28
US2014 Owners Manual/ User Guide