Drawing Up Bobbin Thread - Janome US2014 Instruction Manual

Janome US2014 Instruction Manual
1
2
3
www.aaasewing.com

Drawing Up Bobbin Thread

1 Raise the presser foot and hold the needle thread
lightly with your left hand.
2 Turn the handwheel slowly towards you with your
right hand until the needle goes down and
continue turning the handwheel until the takeÐup
lever is at its highest position.
Lightly draw up the needle thread forming a loop
of the bobbin thread.
3 Pull 15 cm (6") of both threads back and under
the presser foot.
11
US2014 Owners Manual/ User Guide