Using The Seam Guides On The Needle Plate; Turning Square Corners - Janome US2014 Instruction Manual

Janome US2014 Instruction Manual
3
4
www.aaasewing.com
1
2
5
2

Using the seam guides on the needle plate

The seam guides on the needle plate and hook cover
plate help you measure seam width.
* The numbers indicate the distance between the
center needle position and the guide line.
Numbers on the needle plate
Distance in centimeters
1 Guide lines
2
Cornering guide
3
Needle plate
4
Needle plate hole
5 Seam width from the center needle position

Turning square corners

To turn a square corner 1.6 cm (5/8") from the fabric
edge.
When the fabric edge facing you lines up with the
cornering guide as illustrated, stop stitching and lower
the needle by turning the handwheel towards you.
Raise the presser foot and turn the fabric to line the edge
with the 1.6 cm (5/8") seam guide.
Lower the presser foot and begin stitching in the new
direction.
Cornering guide
2
16
10 15 20 3/8" 4/8" 5/8"
1.0 1.5 2.0 1.0 1.3 1.6
US2014 Owners Manual/ User Guide
6/8"
1.9