Corded Buttonhole - Janome US2014 Instruction Manual

Janome US2014 Instruction Manual
1
BH
4
1 3
2
1
1
www.aaasewing.com
2 3
4

Corded Buttonhole

Stitch selector:
1
Presser foot:
2
Thread tension:
3
4 Stitch length:
1. With the buttonhole foot raised, hook the cord on
the cord spur at the back of the buttonhole foot.
Spur
1
2. Bring the ends toward you under the buttonhole foot
until they clear the front end.
3. Hook the filler cord into the forks on the front of foot
to hole them tight.
4. Lower the needle into the garment where the
buttonhole will start and lower the foot.
5. Depress the foot control gently and sew the
buttonhole.
Each side of the buttonhole and the bartacks will
be sewn over the cord.
6. Remove the fabric from the machine and cut the
sewing threads. (See page 21)
7. Pull the left end of the filler cord to tighten it.
8. Thread the end through a darning needle, draw to
the other side of the fabric and cut.
22
BH
Sliding buttonhole foot
1 - 5
(0.5 - 1)
US2014 Owners Manual/ User Guide