Honda 2005 FOURTRAX FOREMAN TRX500 TM Service Manual page 88

LUBRICATION SYSTEM
- nut
- cooling fan
COOLING FAN
three screws
fan motor
ASSEMBLY
Install the fan motor on the shroud in the direction
as shown and tighten the three screws.
TORQUE: 1.5 N m (0.15 kgf-m, 1.1 Ibf-ft)
FAN MOTOR
SHROUD
Install the cooling fan on the fan motor shaft by
aligning the flat surfaces.
Apply locking agent to the fan nut threads.
Install and tighten the fan nut.
TORQUE: 2.7 N-m (0.27 kgf-m, 2.0 Ibf-ft)
COOLING FAN
Install the fan cover onto the shroud and tighten the
three tapping screw.
TORQUE: 0.8 N m (0.08 kgf m, 0.06 Ibf-ft)
FAN COVER
SCREWS
5-6