Integrated Peripherals - ECS A780GM-A User Manual

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Onboard IDE Controller
Onboard SATA Mode
SATA Configuration
Onboard AUDIO Function
Onboard LAN Function
Onboard LAN Boot ROM
Serial Port1 Address
USB Functions
Legacy USB Support
: Move Enter : Select
F1:General Help
OnBoard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
OnBoard SATA Mode (Enabled)
Use this item to enable or disable the onboard SATA mode.
SATA Configuration (IDE)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
OnBoard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
OnBoard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
Enabled
Enabled
IDE
Enabled
Enabled
Disabled
Disabled
Enabled
3F8&IRQ4
Enabled
Enabled
+/-/: Value F10: Save ESC: Exit
F9: Default settings
Using BIOS
35
Help Item
Options