Invacare Fox Service Manual page 26

SERVICE MANUAL
·
Disconnect the plugs (1) from the power module (3).
·
Use the 8 mm socket wrench to loosen both nuts (2).
·
Pull the power module towards the rear and off of the guides.
·
Replace the power module.
Installing the power module:
·
Assemble the parts in reverse order.
·
Reconnect all cable connectors to their former positions.
·
Plug all free slots with a suitable rubber stopper.
·
Select the driving program, as described in chapter 7.2.3.
·
Update the driving program if a new software version is available, as described in chapter 7.3.
·
Modify the driving program using the programming software as needed.
·
The last step is to test all functions of the vehicle.
26
®
Invacare - Fox