Trip B; Elapsed Time; To Reset A Trip Function; Tire Psi - Chrysler 2015 Town & Country Owner's Manual

350 UNDERSTANDING YOUR INSTRUMENT PANEL

Trip B

Shows the total distance traveled for Trip B since the last
reset.

Elapsed Time

Shows the total elapsed time of travel since the last reset
when the ignition switch is in the ACC position. Elapsed
time will increment when the ignition switch is in the ON
or START position.

To Reset A Trip Function

Reset will only occur while a resettable function is
selected (highlighted). Push and hold the SELECT button
to clear the resettable function being displayed.

Tire PSI

Push and release the UP or DOWN button until "Tire
PSI:" displays highlighted in the EVIC. Push and release
the SELECT button to view a graphic of the vehicle with
a tire pressure value at each corner of the graphic.

Units

Push and release the UP or DOWN button until "Units"
displays highlighted in the EVIC and push the SELECT
button. The EVIC, odometer, and navigation system (if
equipped) can be changed between English and Metric
units of measure. To make your selection, scroll up or
down until the preferred setting is highlighted, then push
and release the SELECT button until a check-mark ap-
pears next to the setting, showing that the setting has
been selected.

Vehicle Info (Customer Information Features)

Push and release the UP or DOWN button until "Vehicle
Info" displays in the EVIC. Then, push and release the
SELECT button. Push and release the UP and DOWN
I n f o r ma t i o n P r o v i d e d b y :