Enabling/Disabling Parksense; Service The Parksense® Rear Park Assist System - Chrysler 2015 Town & Country Owner's Manual

Table of Contents

Advertisement

258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Enabling/Disabling ParkSense®
ParkSense® can be enabled and disabled through the
Customer-Programmable Features section of the EVIC.
The available choices are: OFF, Sound Only, or Sound and
Display. Refer to "Electronic Vehicle Information Center
(EVIC)/Personal Settings (Customer-Programmable Fea-
tures)" in "Understanding Your Instrument Panel" for
further information.
When ParkSense® is disabled, the instrument cluster will
display the "PARK ASSIST SYSTEM OFF" message for
approximately five seconds. Refer to "Electronic Vehicle
Information Center (EVIC)" in "Understanding Your
Instrument Panel" for further information. When the
shift lever is moved to REVERSE and the system is
disabled, the EVIC will display the "PARK ASSIST SYS-
TEM OFF" message for as long as the vehicle is in
REVERSE.
Service The ParkSense® Rear Park Assist
System
During vehicle start up, when the ParkSense® Rear Park
Assist System has detected a faulted condition, the
instrument cluster will actuate a single chime, once per
ignition cycle, and it will display the "SERVICE PARK
ASSIST SYSTEM" message. Refer to "Electronic Vehicle
Information Center (EVIC)" in "Understanding Your
Instrument Panel" for further information. When the
shift lever is moved to REVERSE and the system has
detected a faulted condition, the EVIC will display the
"SERVICE PARK ASSIST SYSTEM" message for as long
as the vehicle is in REVERSE. Under this condition,
ParkSense® will not operate.
If "SERVICE PARK ASSIST SYSTEM" appears in the
Electronic Vehicle Information Center (EVIC) after mak-
ing sure the rear fascia/bumper is free from snow, ice,
mud, dirt and debris, see your authorized dealer.
I n f o r ma t i o n P r o v i d e d b y :

Advertisement

Table of Contents
loading

Table of Contents