Switch Integrity; Autonegotiation - NETGEAR XS728T Hardware Installation Manual

Smart switch

Hide thumbs Also See for XS728T:

Table of Contents

XS728T Smart Switch

that cable distances, repeater limits, and other physical aspects of the installation do not

exceed the Ethernet limitations.

Switch Integrity

If necessary, verify the integrity of the switch by resetting the switch. To reset the switch,

remove the AC power from the switch and then reapply AC power. If the problem continues,

contact NETGEAR technical support. In North America, call 1-888-NETGEAR. If you are

outside North America, refer to the support information card included with your product.

The RJ-45 ports negotiate the correct duplex mode, speed, and flow control if the device at

the other end of the link supports autonegotiation. If the device does not support

autonegotiation, the switch determines only the speed correctly, and the duplex mode

defaults to half-duplex.

Troubleshooting

Table of Contents