Package Contents - NETGEAR XS728T Hardware Installation Manual

- IEEE 802.3x (full-duplex flow control)
• AutoSensing and autonegotiating capabilities for all ports.
• Auto Uplink™ on all ports to make the right connection.
• Automatic address learning function to build the packet-forwarding information table. The
table contains up to 16K Media Access Control (MAC) addresses.
• Store-and-forward transmission to remove bad packets from the network.
• Full-duplex IEEE 802.3x pause frame flow control.
• Active flow control to minimize packet loss and frame drops.
• Per-port LEDs and Power LED.
• Internal open frame power supply.
• Standard NETGEAR 7xx series chassis (1U high).
• NETGEAR green power-saving features:
- Energy efficiency mode that fully conforms to the IEEE 802.3az standard
- Per-port automatic change to a lower power mode when the port link is down

Package Contents

The following figure shows the package contents of the smart switch.
Figure 1. Package contents
Verify that the package contains the following:
• XS728T Smart Switch
• Rubber footpads for tabletop installation
• Rack-mounting kit
• Power cord
XS728T Smart Switch
Introduction
7