Switch Integrity; Autonegotiation - NETGEAR ProSafe GS516TP Installation Manual

GS516TP Gigabit Smart Switch
that cable distances, repeater limits, and other physical aspects of the installation do not
exceed the Ethernet limitations.

Switch Integrity

If necessary, verify the integrity of the switch by resetting the switch. To reset the switch,
remove the AC power from the switch and then reapply AC power. If the problem continues,
contact NETGEAR technical support.

Autonegotiation

The RJ-45 ports negotiate the correct duplex mode, speed, and flow control if the device at
the other end of the link supports autonegotiation. If the device does not support
autonegotiation, the switch determines only the speed correctly, and the duplex mode
defaults to half-duplex.
Troubleshooting
26