Display Assembly - HP EliteBook 745 G2 Maintenance And Service Manual

Display assembly

NOTE: Non-touch displays are spared at the subcomponent level only. Touch displays are only spared as a
whole (touch display components are not spared).
In non-touch models, you can remove the raw display panel with the display assembly still connected to the
computer. For more information, see
The following section shows how to remove the raw display panel without removing the display assembly
from the computer. See the display section later in this chapter to remove internal components that require
that you remove the display assembly.
Description
Display assembly, touch screen (whole assembly)
15 in, FHD, for use in HP EliteBook 755 models
14 in, FHD, for use in HP EliteBook 745 models
Display enclosure (non-touch models) (includes 4 transceivers with antennas)
Display bezel for use in HP EliteBook 745 models
Display bezel for use in HP EliteBook 755 models
Display hinges:
For use in HP EliteBook 745 models
For use in HP EliteBook 755 models
Antenna Kit (includes antenna cables and transceivers):
For use in HP EliteBook 745 models
For use in HP EliteBook 755 models
Before removing the display assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Service door (see
b. Battery (see
c. Fan (see
d. Keyboard (see
e. Base enclosure (see
Remove the display assembly:
92 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Display panel (non-touch) on page
Service door on page
Battery on page 49)
Fan on page 74)
Keyboard on page 58)
Internal base enclosure on page
63.
47)
68)
Spare part number
774990-001
777325-001
779682-001
779686-001
730957-001
730819-001
780080-001
780081-001
ENWW