Using Symbols And Special Characters - Dymo LabelMANAGER 350 User Manual

LM350 NEU.qxd 07-11-2003
The display shows the line on which you are
currently entering text. The example below
indicates that the second line is the current line
on the label.
You can use the arrow keys to move from one
line to another.
Using Mixed Formats
You can apply different fonts and format styles
to the text on a label by dividing the label into
blocks of text or pages. Each page is separated
by a page break. The number of lines that can
be added to a page is determined by the label
width. You can add two page breaks to a label.
Alignment, underline, box styles, and back-
ground patterns cannot be mixed on a label.
These styles are common to the entire label.
To add a page break
1. Enter and format text for the first page of
the label.
2. Press Extra.
3. Use the arrow keys to select Insert Format
Break and press OK.
4. Continue entering and formatting text for
the next page of the label.
Using Tabs
You can add tabs to a label to align text on
multi-line labels. Tabs are left justified and the
default spacing is 2.0" (50 mm).
To change the tab spacing
1. Press Settings.
2. Use the arrow keys to select
Set Tab Length and press OK.
3. Use the Up and Down arrow keys to
increase or decrease the tab setting, and
then press OK.
To insert a tab
1. Enter your text.
2. Press the Tab key and continue entering text.
15:19 Pagina 7
Using Symbols and
Special Characters
Symbols and other special characters can be
added to your labels.
Adding Symbols
The labelmaker supports the extended symbol
set as shown below.
To add a symbol
1. Press Symbols. The first row of symbols
shown in the table appears in the display.
7
Row Position in row
Figure 10