Page 2
No part of this document or the software may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of Sanford, L.P. Trademarks DYMO, DYMO Label, and LabelManager are registered marks in the US and other countries. All other trademarks are the property of their respective holders.
Quick Start Guide ® ® This guide describes some of the features of your DYMO LabelManager Wireless PnP label maker. Read the following sections for information about using your label maker. Registering Your Label Maker Getting to Know your Label Maker ...
Getting to Know your Label Maker Become familiar with the features shown in the following figure. Power button/ Cutter status light Serial number Wireless Battery status light compartment Label exit slot Side cover Cleaning tool Label Back View compartment Reset button USB port Figure 1...
Inserting the Battery Pack The label maker is powered using a rechargeable lithium-ion polymer (LiPo) battery pack. Make sure the USB cable is disconnected before handling the LiPo battery pack. To insert the battery pack Press and pull to open the side cover of the label maker.
Inserting the Label Cassette Your label maker uses DYMO D1 label cassettes. To insert the label cassette Press and pull to open the side cover of the label maker. Make sure the tape and ribbon are taut across the mouth of the...
® To start the software for Mac OS If necessary, press the power button to turn on the label maker. The DYMO Wireless PnP volume appears on your desktop. Double-click DYMO W-PNP to open the volume. Double-click to start the software.
Drag the curser to draw a selection box around the area to capture. The selected area is inserted into your label. To take advantage of more advanced formatting features, click in the built-in software to download and install DYMO Label™ v.8.5 or later from the DYMO Web site.
Checking the Label Maker Status The label maker status is displayed in the software window. The following table describes the possible states of the label maker. See Figure 6 on page 6. Label maker is connected; battery pack is charging Label maker is connected;...
To charge the battery using the wall adapter Insert one end of the USB cable into the label maker. Insert the other end of the USB cable into the wall charger. See Figure 7. Plug the wall adapter into a working power outlet. If the label maker is turned off, press the power button to turn the label maker on and start charging the battery pack.
Adding the Wireless Printer To print labels to the networked printer, you must download and install DYMO Label™ v.8.5 or later from the DYMO Web site, and then add the printer to your computer. To add the wireless printer to a Windows computer Download DYMO Label™...
Page 12
Do one of the following: • If this is the first DYMO label printer installed on the computer, click Yes when prompted by the software to add the label maker as a wireless printer. • If a DYMO label printer is already installed on the computer, choose Add Network Printer from the File menu.
Page 13
For complete details on using the software, refer to the online Help or the DYMO Label User Guide. From the Help menu in DYMO Label software, you can view the following: DYMO Label Help DYMO Label User Guide...
Page 14
Safety Precautions for Lithium-Ion Polymer Rechargeable Battery Pack Inaccurate handling of a lithium-ion polymer rechargeable battery pack may cause leakage, heat, smoke, an explosion, or fire. This could cause deterioration of performance or failure. This may also damage the protection device installed in the battery pack.
Page 15
1-Year Warranty for Your DYMO Product Your electronic DYMO product is sold with a 1-year warranty from the date of purchase against defects in material and workmanship. DYMO will repair or replace your product free of charge on the following conditions: 1 Products returned under this warranty must be accompanied by a description of the defect together with a copy of the product’s proof of purchase and your full contact...
Page 16
1214 VERNIER – SWITZERLAND REPRESENTED IN THE EU BY / REPRÉSENTÉ EN UE PAR: DISTRIBUTED BY/DISTRIBUÉ PAR/DISTRIBUIDO POR: PRODUCT OF / PRODUIT DE: DYMO, ATLANTA, GA 30328, L.P. WWW.DYMO.COM NWL BELGIUM SERVICES BVBA NEWELL RUBBERMAID EUROPE SÀRL IMPORTED INTO CANADA BY/IMPORTÉ AU CANADA...