(1/2”), or 19 mm (3/4”). These tape cassettes labelmaker disconnects power from the are available in a wide range of colors. Visit batteries. www.dymo.com for information on obtaining To connect the power adapter tapes and accessories for your labelmaker. 1. Plug the power adapter into the power connector on the top, left side of the labelmaker.
LM350 WEU.qxd 12-11-2003 09:02 Pagina 4 5. Press firmly until cassette clicks into place. Remove the protective cardboard insert See Figure 5. from between the print head and roller. See 6. Close the tape cassette door. Figure 4. 2. Set the cassette switch for the size of the tape Settings cassette that you are inserting.
LM350 WEU.qxd 12-11-2003 09:02 Pagina 5 Getting to Know Your Labelmaker The previously selected style settings are also restored. The following sections describe each feature in detail. Become familiar with the location of Upper and Lower Case the feature and function keys. See Figure 1 on The CAPS key toggles capitalization on and off.
Figure 9. Six font are available for your labels: Arial Narrow, Arial Normal, Arial Wide, Times Underline DYMO New Roman, One Stroke and Frankfurter. Square Box DYMO When you specify a font size, that size applies...
LM350 WEU.qxd 12-11-2003 09:02 Pagina 7 • Maximum of two lines on 3/8" (9 mm) and To change the tab spacing 1/2" (12 mm) labels 1. Press Settings. • Maximum of one line on 1/4" (6 mm) labels 2. Use the arrow keys to select Set Tab Length To create a multiple-line label and press OK.
LM350 WEU.qxd 12-11-2003 09:02 Pagina 8 3. When you locate the desired symbol, press Position in row OK to add the symbol to your label text. Printing Options You can print multiple copies of the same label, print serialized and fixed-length labels, review label text and format, and adjust the printing contrast.
Page 9
LM350 WEU.qxd 12-11-2003 09:02 Pagina 9 3. Press Extra. Aligning the Text When you print a fixed length label you can 4. Use the arrow keys to select Incremental choose to align the text at the left, center, or Print and press OK. right side of the label.
LM350 WEU.qxd 12-11-2003 09:02 Pagina 10 Using Labelmaker Memory ever, if you select a location that is filled, the previous label format will be overwritten. The labelmaker has a powerful memory feature 3. Use the arrow keys to select a field and that stores text and formatting as follows: press OK.
To clean the print head Wipe the print head clean using the cleaning tool located inside the tape compartment lid. DYMO D1 label cassettes Width: 9mm 12mm 19mm (1/8") (1/4") (1/2") (3/4")
Do one of the following: • Adjust the fixed-length label setting appropriately, or • Select a narrower font. If you still need assistance, contact DYMO Customer Support for your country. The Warranty booklet includes a list of contact numbers for each country.
Page 13
No part of this document may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of DYMO Corporation. LabelMANAGER is a registered trademark of DYMO Corporation. DYMO is a registered trademark of Esselte Corporation. All other trademarks are the property of their respective holders.