Daily Use; Place An Outgoing Call; Answer An Incoming Call; Conference Up To Three Additional Headsets - Plantronics CS540 User Manual

Daily Use

Place an Outgoing Call

1
Wearing your headset, press the headset call button.
2
Remove the handset from the cradle. You will hear a dial tone.
NOTE This step will be automatic if you install a lifter or EHS cable accessory. For a complete
list of accessories, visit plantronics.com/accessories.
3
Dial the number using your desk phone.
4
To end the call, press the headset call button and hang up the handset.

Answer an Incoming Call

1
Wearing your headset, press the headset call button.
2
Remove the handset from the cradle speak to your caller.
NOTE This step will be automatic if you install a lifter or EHS cable accessory. For a complete
list of accessories, visit plantronics.com/accessories.
3 To end the call, press the headset call button and hang up the handset.

Conference Up to Three Additional Headsets

You can conference up to three additional headsets to a call in progress.
Join a Conference Call
While the base has an active link (on a call), place the guest headset into primary user's charge
cradle (this connects the headset to the base). When the base subscription LED stops flashing
white and becomes solid white, the primary headset/user will hear a tone indicating a guest
wishes to join the call. Press the primary user's call button to accept the guest headset within
ten seconds or the request is terminated and the guest will hear an error tone in their headset.
To connect a guest headset that is of different variety than the primary headset press the base
subscription button while the base has an active link. Next, press the guest headset volume up
button until the indicator light turns on. When the base subscription LED stops flashing white
and remains solid white, the request to join will be heard in the primary user's headset and the
primary user will have to press their call button within 10 seconds to accept the guest
Exit a Conference Call
Guests headsets can remain as guests through multiple calls. To remove a guest headset, press
the guest headset's call button or dock the primary user's headset in the charge cradle. A single
tone in the master headset will be heard as each guest leaves the call.
22