GE ZIS360NM Technical Service Manual page 20

To Remove the Evaporator Fan
1. Remove the ice bucket.
2. Disconnect the icemaker connector. Loosen 2
screws and remove icemaker.
3. Remove 4 screws and slide the icemaker drive
motor assembly forward. Disconnect the wiring
connector and remove the assembly.
4. Remove 2 screws and inner section of left ice
bucket track.
5. Remove 2 screws and wiring cover.
6. Remove 6 screws and evaporator fan cover.
Icemaker Drive
Motor Assembly
Wiring
Cover
Evaporator Fan Cover
– 18 –
Screws
Screws
Screws
Screws