Compass; Compass Calibration - Acura 2015 RDX Quick Reference Manual

Compass

*
When you set the power mode to ON, the compass self-calibrates, and the compass
display appears.

Compass Calibration

If the compass indicates the wrong direction, or the CAL. indicator blinks, you need
to manually calibrate the system.
Compass Setting Menu Items
* Not available on all models
1. Set the power mode to ON.
2. Press and hold the SETUP button until the
display shows the compass setting menu.
3. Rotate to select Calibration, then press
.
4. When the display changes to Calibration
Start, press .
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction
after the calibration. The CAL. indicator
goes off.
I n f o r ma t i o n P r o v i d e d b y :
1Compass *
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
1Compass Calibration
Calibrate the compass in an open area.
While setting the compass:
•
The BACK button returns to the previous screen.
•
The SETUP button cancels the setting mode.
225