Table of Contents
Advertisement
■
Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
Memory
Button 1
Memory
Button 2
SET Button
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
1. Set the power mode to ON. Adjust the
driver's seat and the door mirrors to the
desired position.
2. Press the SET button.
u
You will hear a beep, and the memory
button indicator light will blink.
3. Press and hold memory button
within five seconds of pressing the SET
button.
u
Once the seat and the door mirrors
position has been memorized, the
indicator light on the button you pressed
stays on.
1. Move the shift lever to
P .
(
2. Apply the parking brake.
3. Press a memory button (
1 or
(
u
You will hear a beep, and the indicator
light will blink.
The seat and the door mirrors will
automatically move to the memorized
positions. When they have finished moving,
you will hear a beep, and the indicator light
stays on.
I n f o r ma t i o n P r o v i d e d b y :
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the double-
beep.
•
You readjust the door mirrors.
•
You set the power mode to any position except
(
1 or
(
2
ON.
1Recalling the Stored Position
The seat and the door mirrors will stop moving if you:
•
Press the SET button, or a memory button (
).
2
(
2 ).
(
•
Adjust the seat position.
•
Adjust the door mirrors.
•
Shift into any position except
or
(
1
.
(
P
131
Advertisement
Chapters
Table of Contents
