Table of Contents
Advertisement
Remote Transmitter Care
Replacing the Button Battery
If the indicator does not come on when the button is pressed, replace the battery.
Press
Battery
Battery type: CR2032
1. Remove the built-in key.
2. Remove the upper half by carefully prying
on the edge with a coin.
u
Wrap a coin with a cloth to prevent
scratching the transmitter.
3. Make sure to replace the battery with the
correct polarity.
I n f o r ma t i o n P r o v i d e d b y :
1Replacing the Button Battery
NOTICE
An improperly disposed of battery can damage the
environment. Always confirm local regulations for
battery disposal.
Replacement batteries are commercially available or
at a dealer.
311
Advertisement
Chapters
Table of Contents
