Table of Contents
Advertisement
■
Shift Lever Operation
Tachometer's red zone
Shift Lever Position Indicator
(
M
(Sequential Shift mode) Indicator/
Gear Position Indicator
Depress the brake pedal and press
the shift lever release button to shift.
Shift without pressing the shift lever
release button.
Press the shift lever release button
and shift.
I n f o r ma t i o n P r o v i d e d b y :
1Shift Lever Operation
NOTICE
When you change the shift lever from
vice versa, come to a complete stop and keep the
brake pedal depressed.
Operating the shift lever before the vehicle has come
to a complete standstill can damage the transmission.
Use the shift lever position indicator to check the
lever position before pulling away.
Whichever position the shift lever is in when driving,
a blinking transmission indicator indicates a
transmission problem.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer's red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
It may not be possible to operate the shift lever if the
brake pedal is applied while the shift lever release
button is held down.
Depress the brake pedal first.
Continued
uuWhen DrivinguShifting
(
D
to
(
R
and
245
Advertisement
Chapters
Table of Contents
