Compass - Acura MDX 2020 Owner's Manual

Compass

*
When you set the power mode to ON, the compass self-calibrates, and the compass
display appears.
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
1. Set the power mode to ON.
2. On the top screen of any source, press and hold
u The display switches to the Compass Settings screen.
3. Rotate to select Calibration, then press
4. When the display changes to Calibration Start, press
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction after the calibration. The CAL indicator
goes off.
* Not available on all models
for five seconds.
.
.

1Compass

*
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
1Compass Calibration
Calibrate the compass in an open area.
While setting the compass, press the BACK button to
cancel the setting mode and return to the previous
screen.
Models with navigation system
Models with navigation self-calibrate using GPS. The
compass in the MID and the direction arrow on the
map screen (when Heading-Up view selected) may
not be in sync when first starting the vehicle, but
should correct themselves as you drive.
If the compass in the MID continues to indicate an
incorrect direction, please see your Acura dealer.
443