Symbols; Printing A Label; Cleaning; Troubleshooting - Dymo Letra Tag Instructions For Use Manual

SYMBOLS

SYMBOLS
Press followed by the space bar ( ) to access symbols and special
characters. The display will show: A-H? (or A-F? if "B" has been selected)
Press to cancel, or press a letter key 'A' to 'H' until you find the line of
DEL
symbols required. See table.
Use or to select a symbol. Press to place the symbol in the label.
OK

Printing a label

• To print a label place the cusor anywhere within the label and press .
PRINT

PRINT PREVIEW

+
PRINT
Allows you to preview all your labels before printing.
• Press + and all labels in memory will scroll across the display.
PRINT
CUTTING A LABEL
• To cut a label push the cutter forward as shown in Fig. E.
• The label has a split in the backing for easy removal, as shown in Fig. F.

Cleaning

• Check and clean the print head regularly to ensure optimum print quality - see
Fig. D.
• Using the cleaning tool D1 supplied, clean the print head as shown in D2.

Troubleshooting

No display
• check machine is on
• check batteries and replace if necessary
No response to keys
• remove batteries for a few minutes then refit. The Labelmaker will now reset
No printing or poor text
• check batteries and replace if necessary
• check tape cassette installed correctly and not empty
• clean print head (see 'Cleaning')