Honda 2016 Odyssey Owner's Manual page 81

uuIndicatorsu
Indicator Name
Forward
Collision
Warning
(FCW)
Indicator *
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:On the left: Models with information display
On the right: Models with multi-information display
* Not available on all models
80
On/Blinking
Comes on for a few seconds
●
when you turn the ignition
switch to ON ( w *1 , then goes
off.
Comes on when you have
●
customized FCW to turn off.
Comes on if there is a problem
●
with the FCW system.
Models with information display
Blinks when the system detects
●
a likely collision with a vehicle
in front of you. The beeper
sounds.
Comes on when the FCW
●
system shuts itself off.
Explanation
Stays on constantly without FCW off - Have your
●
vehicle checked by a dealer.
Blinks while driving - Take appropriate action to prevent
●
a collision (apply the brakes, change lanes, etc.).
Stays on - The temperature inside the FCW system is too
●
high. The system activates when the temperature inside the
system cools down.
2 Automatic shutoff P. 420
Stays on - The area around the camera is blocked by dirt,
●
mud, etc. Stop your vehicle in a safe place, and wipe it off
with a soft cloth.
Have your vehicle checked by a dealer if the indicator and
●
message come back on after you cleaned the area around
the camera.
2 Automatic shutoff P. 420
2 Automatic shutoff P. 420
Message *2
— —
— —