Honda 2016 Odyssey Owner's Manual page 483

uuReplacing Light BulbsuBrake Light, Rear Turn Signal Light Bulbs, and Rear Side Marker/Taillights
Lower
Socket
Fastener
482
2. Place one hand on the outer corner of the
taillight assembly and other hand on the
lower edge of the taillight, near the cargo
area.
3. Pull the outer corner of the taillight
assembly toward you while supporting the
assembly with the hand closest to the cargo
area.
4. Turn the socket counterclockwise and
Upper
Fastener remove it.
5. Remove the old bulb and insert a new bulb.
Bulb
1Brake Light, Rear Turn Signal Light Bulbs, and Rear Side Marker/
Taillights
Grommet
To reinstall, insert the fasteners into the grommets
and push the assembly back into place.
uDo not reinstall the assembly if the grommets are
loose or out of the holes. Contact a dealer to
replace them.