Brightness Control - Honda 2016 Odyssey Owner's Manual

Brightness Control

Control Knob
On multi-information display
On information display
* Not available on all models
When the parking lights are turned on and the
ignition switch is in ON *1 , you can use the
w (
brightness control knob to adjust instrument
panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beeper when the brightness
reaches minimum or maximum. The
information display * /multi-information
display * will return to its original state several
seconds after you adjust the brightness.
■
Brightness level indicator
The brightness level is shown on the
information display * /multi-information
display * while you are adjusting it.
*1: Models with the smart entry system have an
ENGINE START/STOP button instead of an ignition
switch.
uuOperating the Switches Around the Steering WheeluBrightness Control
1Brightness Control
Instrument panel brightness varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
Pressing the
(information) button
If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This cancels
the reduced instrument panel brightness when the
exterior lights are on.
(Select/Reset) knob or the /
* changes to a different display.
153