Homelink® Universal Transceiver; Training Homelink - Honda 2016 Odyssey Owner's Manual

HomeLink® Universal Transceiver
The HomeLink® Universal Transceiver can be programmed to operate up to three
remote controlled devices around your home, such as garage doors, lighting, or
home security systems.
■
Important Safety Precautions
Refer to the safety information that came with your garage door opener to test that
the safety features are functioning properly. If you do not have the safety
information, contact the manufacturer.
Before programming HomeLink, make sure that people and objects are out of the
way of the garage or gate to prevent potential injury or damage.
When programming a garage door opener, park just outside the garage door's
path.

Training HomeLink

Red
Indicator
* Not available on all models
*
If you have not trained any of the buttons in
HomeLink before, you should erase any
previously learned codes. To do this:
• Press and hold the two outside buttons for
about 20 seconds, until the red indicator
blinks. Release the buttons, and proceed to
step 1.
• If you are training the second or third
button, go directly to step 1.
1HomeLink® Universal Transceiver
HomeLink® is a registered trademark of Gentex
Corporation.
Before programming HomeLink to operate a garage
door opener, confirm that the opener has an external
entrapment protection system, such as an "electronic
eye," or other safety and reverse stop features. If it
does not, HomeLink may not be able to operate it.
Continued
*
325