Replacing Light Bulbs - Honda 2016 Odyssey Owner's Manual

Replacing Light Bulbs

Headlight Bulbs
When replacing, use the following bulbs.
High beam headlight: 60 W (HB3 for halogen bulb type)
Low beam headlight: 55 W (H11 for halogen bulb type)
Low beam headlight: 35 W (D2S for high voltage discharge type)
■
High Beam Headlight
Clip
* Not available on all models
*
Driver side
1. Remove the clips using a flat-tip
screwdriver, then remove the upper part of
the air intake duct.
1Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
*
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the cargo area or tow a trailer, have
the aiming readjusted at a dealer or by a qualified
technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Continued 475